China Moair Super Energy Saving 7-12.5bar Working Pressure Two Stage Screw Air Compressor air compressor portable

Solution Description

Moair Tremendous Vitality Saving 7-12.5bar Doing work Force Two Phase Screw Air Compressor

Product Description

The MDE collection 2 phase rotary screw air compressor with double long term magnet motor travel is outfitted with a double motor, double generate and double screw, which has the advantage of higher effectiveness, huge beginning torque and lower sounds. The primary power variety is from 45kw to 110kw, the force range is from 6bar to 10bar and the air stream selection is from 9mthree/min to 26m3/min.

Core factors

Motor 

 

  • Much more steady: no mechanical transmission troubles
    There is no gear shaft in the air compressor and the effective everlasting magnet motor and the male rotor are straight linked on 1 shaft without gear drive, which can remove pitting of equipment or concealed difficulties of tooth fracture.
    Without shaft coupling, 2 built-in PM motors immediately generate 2 airends of the air compressor, avoiding the concealed difficulties of shaft coupling failure.
  • A lot more vitality-financial savings: the airend is often in a sleek working state
    The 2 stage 3 phase everlasting magnet rotary gear screw air compressor of CZPT is powered by 2 independent PM motors and 2 unbiased inverters, which is intelligently controlled these kinds of as keep the airend operating at a ideal stage-strain level by controlling discharge force and interstage force under the circumstance of different rotary pace and distinct strain. The ideal working velocity of air compressor can be routinely calculated while working and then the compression ratio can be balanced by closing match, which can maintain the compressor in a ideal running state, therefore obtaining the highest performance.
  • Much more successful: large-efficiency long lasting magnet motor and no equipment push loss.
    With a motor of a substantial protection degree of IP54, it is more vitality-preserving and it can remain successful at lower frequency and minimal pace.
  • More setting-helpful operation with lower sounds
    No noise of motor bearings, equipment meshing and coupling transmission.
  • More structure-compact
    The volume of PM motor is small and the structure is compact, which can conserve significantly space.

 

Theory of energy-preserving

  • Adjust the traditional induction motor with substantial-efficiency technological innovation of long term magnet rotary screw motor, hence minimizing the use in transmission.
  • Driven by 2 independent PM motors and 2 impartial inverters, the compressor is intelligently managed such as preserve the airend running at a ideal degree-stress position by controlling force of air circulation and interstage pressure underneath the circumstance of different rotary pace and various strain. The ideal operating velocity of compressor can be instantly calculated while managing and then the compression ratio can be balanced by closing match, which can keep the compressor in a best managing point out, hence obtaining the highest effectiveness.
  • Because the gear ratio is set, position efficiency is emphasized in this circumstance. That is to say, only with fixed rotary pace and rated force did it have the very best particular energy. When running in a point out of variable velocity and variable frequency, taking into consideration the fixed velocity of equipment, interstage force will not reach the greatest a single. Rotational speed declining whilst vitality consumption not declining at the same time, it is not suitable for operating in variable pace and variable frequency condition.

Firm Profile

FAQ

Q1: What ‘s your factory address
A2: Our firm is located in NO.88 CZPT Street,HangZhou ,ZheJiang ,China

Q2: How prolonged is our delivery
A2: Our normal shipping time is 30-forty times right after confirmation get & getting recipets for normal compressors, for the other non common need will be mentioned situation by scenario.

Q3: Can you settle for OEM orders? 
A3: Of course, with professional style group, OEM orders are hugely welcome.

 

US $15,000-18,000
/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Stationary Type

###

Samples:
US$ 15000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
US $15,000-18,000
/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Stationary Type

###

Samples:
US$ 15000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China Moair Super Energy Saving 7-12.5bar Working Pressure Two Stage Screw Air Compressor     air compressor portableChina Moair Super Energy Saving 7-12.5bar Working Pressure Two Stage Screw Air Compressor     air compressor portable
editor by czh 2023-01-14