China CZPT China Manufacture 30HP 22kw Diesel Engine Screw Air Compressor for Mining Water Well Drilling Rig

Product Description

Rodlars China Manufacture 30HP 22KW Diesel Engine Screw Air Compressor For
Mining water well drilling rig

Products Description

Product Parameters of CZPT Power Frequency Screw Air Compressor 
Model Motor Power  Pressure  Capacity Noise  Level Outlet Pipe Diameter Net Weight Dimensions Lubricating oil capacity
KW HP Bar m3/min DB Inch Kgs L*W*H(mm) L
LS-10A 7.5 10 7 1.2 66±2 G ½ 160 900*640*850 10
8 1.1
10 0.95
12 0.8
LS-15A 11 15 7 1.65 68±2 G ¾ 270 1080*750*1571 18
8 1.5
10 1.3
12 1.1
LS-20A 15 20 7 2.5 68±2 G ¾ 290 1080*750*1571 18
8 2.3
10 2.1
12 1.9
LS-25A 18.5 25 7 3.2 68±2 G1 350 1300*850*1165 18
8 3
10 2.7
12 2.4
LS-30A 22 30 7 3.8 68±2 G1 410 1300*850*1165 18
8 3.6
10 3.2
12 2.7
LS-40A 30 40 7 5.3 68±2 G1 460 1300*850*1165 18
8 5
10 4.5
12 4
LS-50A 37 50 7 6.8 68±2 G1-½ 600 1400*1000*1345 30
8 6.2
10 5.6
12 5
LS-60A 45 60 7 7.4 72±2 G1-½ 636 1400*1000*1345 30
8 7
10 6.2
12 5.6
LS-75A 55 75 7 10 72±2 G2 1053 1700*1200*1630 65
8 9.6
10 8.5
12 7.6
LS-100A 75 100 7 13.4 72±2 G2 1040 1700*1200*1630 65
8 12.6
10 11.2
12 10
LS-120A 90 120 7 16.2 72±2 G2 1190 1700*1200*1630 72
8 15
10 13.8
12 12.3
LS-150A 110 150 7 21 72±2 G2-½ 1550 2300*1470*1840 90
8 19.8
10 17.4
12 14.8
LS-175A 132 175 7 24.5 75±2 G2-½ 1550 2300*1470*1840 90
8 23.2
10 20.5
12 17.4
LS-200A 160 200 7 28.7 75±2 G2-½ 2200 2300*1470*1840 110
8 27.6
10 24.6
12 21.5
LS-250A 185 250 7 32 75±2 DN100 3500 3600*2100*2190 110
8 30.4
10 27.4
12 24.8
LS-300A 220 300 7 36 82±2 DN100 2560 3600*2100*2190 125
8 34.3
10 30.2
12 27.7
LS-350A 250 350 7 42 82±2 DN100 4500 3600*2100*2190 150
8 40.5
10 38.2
12 34.5
LS-430A 315 430 7 51 82±2 DN100 6000 3600*2100*2190 150
8 50.2
10 44.5
12 39.5
LS-480A 355 480 7 64 84±2 DN100 6500 3600*2100*2190 150
8 61
10 56.5
12 49
LS-540A 400 540 7 71.2 84±2 DN100 7200 3600*2100*2190 180
8 68.1
10 62.8
12 52.2
Remarks:
1.The exhaust volume is measured under the rated exhaust pressure, according to the national standard GB3853 test (equivalent to ISO1217 appendix C).
2.Recommend frequency 30-100%.
3.The above data is based on the standard grid-380V/50HZ.

 

                   Non-standard customization service support

Please make further inquiry for the non-standard specification type and machines which
  are used under high or low temperature, high humidity,dusty working environment etc.

Details Images

Motor
1.IEC high efficiency drive motor
2.IP54 and high temperature F class rating
Controller
1.Easy to use and maintenance free
2.Constant readout of pressure and temperature
3.Provides 24 hours automatic start-stop operation
Inlet valve
The unique design differential pressure valve provide rapid response under any
condition and maintains the set differential pressure between the inlet pressure
and outlet pressure.100% modulating inlet valve to match system air demand.
Filtration system
Ultra efficient Kerry inlet air filters provide clean air that traps dirt particals to
less than 3 microns.
Electrical control protection
1.Phase protectiom
2.Phase sequence protection relay
3.High discharge temperature shutdown
4.Auto-dual control
5.Overload start protection

Company Profile
Luosi Technology Co., Ltd.,one of Biggest Air Compressor Manufacture with 33 years focus
in air Compressor in China.We are specialized in R&D, manufacturing, sales and service of air
compressors and supporting equipment.With over 20,000 square meters morden workshop,one
whole digital inspection line, 3 air compressor line, all with advanced automatic production equipment.We have air compressor technology research and development, manufacturing,
quality, logistics, operation, marketing, and after-sales service departments.

Our company mainly produces screw air compressor, permanent magnet variable frequency air compressor, two-stage permanent magnet air compressor, special laser cutting air compressor,
high and low pressure air compressor, air post-processing equipment (frozen dryer, adsorption
dryer, QPS precision machine, filter, etc.), gas storage tank and supporting parts.Our company
offers variety of products which can meet your multifarious demands. 

We adhere to the management principles of “quality first, customer first and credit-based” since
the establishment of the company and always do our best to satisfy potential needs of our
customers. Our company is sincerely willing to cooperate with enterprises from all over the world
in order to realize a CZPT situation since the trend of economic globalization has developed with anirresistible force.

Certification

FAQ
Q1:Are you a manufactures or trading company?
A1:We are professional manufacture of Screw air compressor of HangZhou
    (Close to HangZhou) ,33 years of focus in Air Compressor.

Q2:What’s your Delivery Time?
A2:Generally 10days.If it is an urgently or Non-standard order, please contact us in advance.

Q3:How long is your air compressor warranty?
A3:One year for the whole machine and 2 years for screw air end, except consumable
     spare parts.

Q4:How many Screw Air Compressor do you produce everyday?
A4:We can produce 300 pieces everyday.

Q5:Can you use our brand?
A5:Yes, Both OEM & ODM service can be accepted.

Q6:How long could your air compressor be used?
A6:Generally, more than 10 years.

Q7:What’s payment term?
A7:T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept
      USD, RMB, Euro and other currency.

Q8:How about the maintenance?
A8:First maintenance need to be done after 500Hours, and then every 2000-3000 hours
      to do the normal maintenance, and consider the actual environment.

Q9:How do you control quality ? 
A9:1.The raw materials are strictly inspected 
      2.Each compressor must pass at least 5 hours of continuous testing before leaving
         the factory.
Payment and Shipping

Types of Air Compressors

There are many types of Air Compressors available on the market. Learn which 1 is right for your needs and what makes 1 better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which 1 you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.
air-compressor

Air Compressors

Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in 1 stroke – equivalent to the complete rotation of the piston’s crankshaft.
These devices change electrical or mechanical energy into pressurized air. When air is compressed, its volume decreases, increasing its pressure. Air compressors typically have a minimum pressure of 30 bars. The lower pressure band is the range of air pressure. Most compressors are controlled separately, but network controls can be used to interconnect multiple compressors. This type of controller will not work for all types of compressors. There are other types of air compressors that can communicate with each other.
Compressed air has multiple applications in all kinds of industries. In agriculture, it can power pneumatically powered material handling machines for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also used in the pharmaceutical industry for mixing tanks, packaging, and conveyor systems. Portable air compressors, which can be powered by diesel fuel, are frequently used at remote drilling sites. Portable air compressors are also commonly used in oil and gas. They can be used to remotely control valves and install reactor rods.
Whether you use an air compressor for agricultural purposes or in a manufacturing setting, there are some features to consider when choosing an air compressor for your needs. A good compressor will have a safety device. It will automatically shut off the input air and output air once sufficient compressing has been achieved. These features will help your air compressor remain efficient and protect your equipment. The safety device is an important feature of any air compressor to increase its overall efficiency.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use 1 of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
air-compressor

Single-stage models

When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use 2 stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Although single-stage air compressors produce less power, they can produce enough air to power pneumatic tools and other pneumatic equipment. These single-stage units are most useful for smaller-scale home projects and DIY projects. For more industrial purposes, a dual-stage model is the best choice. But if you’re in a hurry, a single-stage unit may be sufficient. Ultimately, it depends on what you plan to do with the air compressor.
Single-stage air compressors feature a single cylinder, 1 piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Multi-stage air compressors are generally more expensive and more energy-efficient than single-stage units, but they can offer higher air flow rates. While they may be more complex, they can lower general operating expenses. If you plan on using your air compressor for industrial or commercial use, a dual-stage model might be the best choice. However, if you’re planning to use the air compressor for mass production, a single-stage model may be the best choice.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the 2 pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.

Low-noise models

Despite its name, low-noise models of air compressors are not all the same. The noise level of a compressor can be affected by several factors, including the power source and proximity to the machine. Reciprocal compressors are generally louder than electric ones because of their many moving parts. By contrast, rotary-screw and scroll compressors have fewer moving parts and are quieter.
The noise level of a gas-powered air compressor can be extremely high, making it unsuitable for use indoors. To combat this problem, you can choose an electric model. The noise level of a compressor is primarily caused by motor friction. The cover of a piston is also a major factor in noise, as pistons with minimal covers will produce a lot of noise. Previously, oil was required for a quiet compressor. However, this has changed thanks to the medical industry’s demand for oil-free models.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These 2 features make it a great choice for businesses.
Low-noise models of air compressors are available for the construction industry. However, these compressors are not necessarily low-quality, which is why you should consider the noise level of your air tool before purchasing one. The specialists at CZPT can recommend the low-noise models for your particular application and space. Noise can distract people who work near the air compressor. That is why many businesses now opt for these models.
air-compressor

Oil-free models

A number of oil-free models of air compressors are available, but what makes them special? Oil-free compressors don’t contain oil, so they’re lubricated by grease instead. They’re a good choice if you’re working with a small compressor and don’t want to risk damaging it. On the other hand, oil-free models do generate significant amounts of heat, which can damage the compressor. Higher pressure can grind the compressor against itself, or even warp it.
A few words of knowledge can help you choose the best oil-free air compressor for your needs. For example, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower means a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technology is a modern air compression system that uses a stationary and mobile spiral. This reduces the volume of air in the compressor by directing it to the center.
Purchasing an oil-free air compressor doesn’t have to be a daunting task, though. A good distributor can advise you on what type of oil-free air compressor is right for you. This way, you can save money and enjoy peace of mind while using your air compressor. And, of course, the best way to get a great deal on an air compressor is to speak to a distributor who is knowledgeable about the products available.
An oil-free air compressor is a great option for businesses that are sensitive to the contamination of air. For example, in the pharmaceutical and food industry, a minuscule oil could spoil a product or even damage production equipment. Oil-free air compressors generally have lower maintenance costs than oil-flooded models because there are fewer moving parts. Because of this, oilless air compressors require fewer maintenance and may still need to be replaced occasionally.
A few advantages of an oil-free air compressor over an oil-lubricated 1 include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.

China CZPT China Manufacture 30HP 22kw Diesel Engine Screw Air Compressor for Mining Water Well Drilling Rig  China CZPT China Manufacture 30HP 22kw Diesel Engine Screw Air Compressor for Mining Water Well Drilling Rig